Design and installation of weighbridges

Weighbridges

Able to meet the needs of even the most demanding users, Bilanciai Porro manufactures weighbridge systems distinguished by their efficiency and perfectly in line with the UNI EN ISO 9001: 2000. Headquartered in Paderno Dugnano - a few minutes from the SP44BIS - the company is highly appreciated throughout the province of Milan for the efficiency of its weighing systems and the timeliness of maintenance.

 

High-power vehicles weighing equipment

The range of facilities available is the result of a careful and continuous study of the market needs, not only economically, but also at the functional and ergonomic conditions.

In addition to the standard products, Bilanciai Porro is able to build customized systems for specific applications or to safeguard existing facilities and reduce costs of revamping.

 

Underground, floor-mounted and in cement

There are various types of bridge systems available:

  • underground: constructed using modules of variable size buried flush with the floor, these systems require minimal installation time and are cheaper than more complex weighing systems;
  • floor-mounted: particularly convenient for pre-existing industrial yards, these systems can be installed on metal plates anchored to the ground, without incurring additional expenses in masonry;
  • in concrete: resistant to wear and erosion from atmospheric agents, such systems allow a considerable saving in terms of maintenance, especially in the long term.

ATLAS - Everlasting modular weighbridge in painted steel

THETIS - Weighbridge in iron / concrete ready for work

TRANSPORT - Transportable weighbridge ideal for construction sites and temporary installations

MINI-ATLAS - Exceptional weighbridge in painted steel with full-width module

T_TRE - Exceptional weighbridge in painted steel with full-width module

Atlas  

Modular weighbridge

Atlas

Road weighbridge with low profile for weighing articulated vehicles of up to 20 m. Perfect value / price ratio and easy installation. Available in both underground and floor-mounted versions.

Complete with a perimeter crown and all the accessories for installation.

 

General characteristics

PLATFORM consists of 4/6 standardized modules, easily assembled in work monolithic structure made of IPE beams welded to buckle plate, sheared and trimmed on 4 sides

The modules are bolted to sleepers, covered by removable hatches for inspection to the groups of load cells.

The breakdown of the bridge in a few elements facilitates handling and allows the transport in open top vehicles, making installation simple and very fast.

In the underground version there is no limit to the cross passage.

 

Structural system

DIMENSIONS of the underlying structures and choice of electronic sensors take into account the Italian metric standards (generally more restrictive) and CE standards, as well as a significant overhead on the limiting masses of fully loaded vehicle quoted in the Highway Code, resulting in reliability and durability of the weighing system.

 

Surface treatments

SURFACE is painted in gray RAL 7031, 90/120 micron thick, synthetic fast drying finish, single-layer high corrosion protection, playing "one-coat" of anti-rust and coverage (compatible with all types of paint for future additional coating). On request can be applied different treatments: sandblasting and painting with epoxy primers and polyurethane finishes up to 250 microns.

 

Devices

PERIMETER METAL CROWNING complete with clamps is installed to protect the edge of the pit and finishing platform. The inertia of the vehicles located on the platform is discharged into the foundation by means of suitable dampers swing.

Dimensions (m) Modules Supports Capacity / division
8x3 4 6 40000 kg/10 kg
10x3 4 4 60000 kg/20 kg
14x3 6 8 60000 kg/20 kg
16x3 6 8 80000 kg/20 kg
18x3 6 8 80000 kg/20 kg
20x3 8 10 100000 kg/50 kg

Thetis

Modular weighbridge in iron / cement

Thetis

Road weighbridge with low profile for weighing of articulated vehicles up to 18 m. Modular construction in stainless steel.
Ideal for temporary installation.
Only 270 mm in height.
Very easy to install.
Requires no special foundations.
High precision load cells integrated in weighing modules.
Designed according to DIN 8119.

Perfect value / price ratio and easy installation.

 

General characteristics

PLATFORM is constituted by 2/3 standardized modules, easily assembled in work with a monolithic structure constituted by electrowelded IPE beams

The modules are equipped with brackets for fastening the load cells, the areas of access to the cells are covered with metal sheets removable for inspection and maintenance.

The breakdown of the bridge in a few elements facilitates handling and allows the transport in open top vehicles, making installation simple and very fast.

In the underground version there is no limit to the cross passage.

 

Structural system

DIMENSIONS of the underlying structures and choice of electronic sensors take into account the Italian metric standards (generally more restrictive) and CE standards, as well as a significant overhead on the limiting masses of fully loaded vehicle quoted in the Highway Code, resulting in reliability and durability of the weighing system.

 

Surface treatments

All metal parts embedded in the concrete are galvanized for maximum protection and less frequent maintenance.

 

Concreting

When performed at the factory, the flow of concrete is treated on the surface with products based on quartz and smoothed with suitable tools to ensure an accurate level of finishing.

If you choose to pour concrete directly into the work, this can be performed simultaneously with the recovery of the jet boundary.

 

Transportation and installation

If the scales is installed at the factory, it will be possible to send modules with the heads with "fake" cells that are already affixed and significantly reduce the installation time.

Dimensions (m) Modules Supports Capacity / division
8x3 2 6 40000 kg/10 kg
9x3 2 6 60000 kg/20 kg
14x3 3 8 60000 kg/20 kg
16x3 3 8 80000 kg/20 kg
18x3 3 8 80000 kg/20 kg

Transport

Transportable weighbridge

Transport

Road weighbridge with low profile for weighing of articulated vehicles up to 18 m. Modular construction in stainless steel.
Ideal for temporary installation.
Only 270 mm in height.
Very easy to install.
Requires no special foundations.
High precision load cells integrated in weighing modules.
Designed according to DIN 8119.

Perfect value / price ratio and easy installation.

 

General characteristics

PLATFORM consists of 6/8 standardized modules, easily assembled in work monolithic structure made of welded beams.

Designed for a simplified transport.
All parts of the scales, including the load cells, remain easily accessible after installation, ensuring easy maintenance.

Does not require special foundations, can be installed on any horizontal surface in cement, able to allow the transit of trucks at full load (surface pressure: 1.4 kg / cm2).

 

Structural system

DIMENSIONS of the underlying structures and choice of electronic sensors take into account the Italian metric standards (generally more restrictive) and CE standards, as well as a significant overhead on the limiting masses of fully loaded vehicle quoted in the Highway Code, resulting in reliability and durability of the weighing system.


Surface treatments

SURFACE is painted with synthetic paint with fast drying, 90/120 micron thick, finish, single-layer high corrosion protection as "one-coat" for anti-rust and coverage (compatible with all types of paint for future additional coating). On request can be applied different treatments: sandblasting and painting with epoxy primers and polyurethane finishes up to 250 microns.

 

 

Options

Optionally you can have covers for the center tunnel (to weigh cars or small vehicles).

More robust version for weighing vehicles with a high axial load.

All elements can also be galvanized.

Dimensions (m) Modules Supports Capacity / division
8x3 4 6 40000 kg/10 kg
9x3 4 6 60000 kg/20 kg
14x3 6 8 60000 kg/20 kg
16x3 8 10 80000 kg/20 kg
18x3 8 10 80000 kg/20 kg
RAMPS 4    

Mini-atlas

Scales for light vehicles

Mini-atlas

Road weighbridge with low profile for weighing trucks of up to 6,000 kg

 

Perfect value / price ratio and easy installation.

Available in both underground and floor-mounted versions.

Full crowning perimeter and all the accessories for installation.

 

For installation above ground steel ramps are available.

T-tre

Modular weighbridge

T-tre

Road weighbridge with low profile for weighing articulated vehicles of up to 20 m. Perfect value / price ratio and easy installation. Available in both underground and floor-mounted versions. Full crowning perimeter and all the accessories for installation.
CE-M APPROVED for business transactions

 

General characteristics

PLATFORM consists of one module on a monolithic structure and checkered or streaked plate, sheared and trimmed on 4 sides.

The modules are equipped with removable sheets for inspection access to the groups of load cells.

 

Structural system

DIMENSIONS of the underlying structures and choice of electronic sensors take into account the Italian metric standards (generally more restrictive) and CE standards, as well as a significant overhead on the limiting masses of fully loaded vehicle quoted in the Highway Code, resulting in reliability and durability of the weighing system.

 

Surface treatments

SURFACE is painted, 90/120 micron thick, synthetic fast drying finish, single-layer high corrosion protection, playing "one-coat" of anti-rust and coverage (compatible with all types of paint for future additional coating).

 

Devices

PERIMETER METAL CROWNING complete with clamps is installed to protect the edge of the pit and finishing platform. The inertia of the vehicles located on the platform is discharged into the foundation by means of suitable dampers swing

Dimensions (m) Modules Supports Capacity / division
5x2,5 1 4 6000 kg/2 kg
RAMPE 2    
Share by: