Static weighing of each individual axis
Dynamic weighing in motion, automatic sum of the weights of the axes


General characteristics

Axle weighing devices are available both for static and dynamic weighing. Axle weighing is used when there is no space to install a traditional weighbridge and it is not necessarily to legalize the weighing (for overload control).


Static weighing

For static weighing it is necessary to stop every axis on the platform and manually control the weight acquisition. The total weight can be stored in the indicator for the subsequent adding to a second weighing.


Dynamic weighing

Dynamic weighing is carried out by passing over the platform at a constant speed not exceeding 10km / h. The total weight is the sum of the individual machine axes. The system keeps track of the individual weights eliminating potential interference and filtering values.


External influences on the measurement

The accuracy of measurement depends on the flatness of the ground before and after the weighing. We recommend at least 20 meters of perfectly level ground before and after the weighing device. Also construction and status of the vehicle affect the weighing accuracy (suspension status, tire pressure, etc.).

Type of driving: the vehicle must pass over the weighing device at a constant speed without braking and without accelerating.


Surface finish

Also available with all parts galvanized.

Use Dimensions Supports Capacity / division
STATIC WEIGHING 3x0,8 4 20000 kg/5 kg
Share by: